Sectors / manufacturing
Manufacturing
We work in active manufacturing plants — over running press lines, around conveyors, and under tight environmental controls. Negative-air containment, NACE-trained crews, and DFT logs delivered at closeout. Production keeps running.
What this sector requires
- Full negative-air containment with HEPA exhaust over live equipment
- NACE / SSPC standards with documented DFT verification
- Aggressive chemistry compatibility for secondary containment
- Aerial work to 80' on boom and swing stage in occupied bays
Systems we install for manufacturing
- Inorganic zinc + epoxy + polyurethane on structural steel
- Vinyl ester with woven glass for secondary containment
- Intumescent fireproofing — UL-rated assemblies
- OSHA 1910.144 safety color systems
- DTM acrylic on equipment and piping
How we work in occupied manufacturing facilities
- 01Containment plan, air monitoring, atmospheric permits
- 02Power-tool clean (SP 3) or abrasive blast (SP 6 / SP 10)
- 03Stripe coat at welds, bolt heads, and edges
- 04Full-coat application by airless spray, back-roll where required
- 05DFT verification per SSPC-PA 2 with per-panel report
§ 05 — Engage
Mobilize a crew to your facility.
Scope walks within 72 hours of inquiry. Phased schedules built around continuous operations.